Buy power low.
Use it later.

A battery on your site stores electricity while it is cheap or self-generated, then releases it through the hours that cost the most. Same building, same load, lower bill.

See the payback
Battery energy storage containers alongside a solar array

A typical day

Typical commercial profile in Singapore: solar peaks at midday, the tariff peaks in the evening, and the battery moves energy between the two.

Three jobs, one asset

01

Peak shaving

Cuts the billed monthly maximum

Demand charges are set by a single worst half hour. The battery discharges through those windows so the meter never records the spike, and the saving repeats every month whether or not the site gets busier.

02

Solar shifting

Raises self-consumption to 80–95%

A rooftop array generates at midday, when most commercial buildings need the least. Storing that surplus and releasing it after dark replaces evening grid energy at full tariff instead of exporting it at a lower rate.

03

Backup supply

Transfer in under 20 ms

Lifts, cold rooms, servers and chargers stay up through a grid interruption, with no generator start delay. New load can also sit behind the battery rather than waiting on a supply upgrade application.

From data to dispatch

STEP 01

Model

Twelve months of interval data read against your tariff, to size power and duration and show the payback before anything is ordered.

STEP 02

Engineer

Protection, earthing, ventilation and fire safety designed with the cabinet siting, then submitted for grid-connection approval.

STEP 03

Install

Delivery, termination and commissioning staged around your operating hours, with witnessed testing at handover.

STEP 04

Dispatch

The energy management system runs daily cycles and we report state of health, throughput and realised savings every month.

Start with your own numbers

Send twelve months of interval data and your current tariff. We come back with a sized system, a modelled payback and a commercial model.

Talk to us